Industrial Infrared Heaters

Casso-Solar has designed and built infrared heaters for over 60 years. With every application being unique, our selection of customizable heaters has you covered.

Custom & Standard Industrial Electric Infrared Heating Panels and Tubes

Infrared radiant heating systems are among the most energy-efficient, yet high-intensity systems that are used to heat objects in manufacturing processes. Infrared heaters are designed to directly heat objects in focused areas rather than heating the entire volume of a processing chamber.

At Casso-Solar Technologies, we specialize in electric infrared heaters used in various industrial heating treating applications. With an eye on productivity, energy saving, and cost-effectiveness, we can help you select customized industrial infrared heaters that meet your specific requirements.

Our infrared heaters are powered by proven technologies and made of high-quality materials that ensure their lasting performance.

We offer a selection of standard designs as well as heaters custom-built for a customer's unique application. Contact us today to discuss your requirements and receive an expert recommendation.

Type V-Series Heater

V-shaped elements with low mass for fast heating/ cooling and minimal thermal lag for tight process control. Provides up to 100 Watts per Square Inch with Element temperatures up to 2100 Deg F.

SWL Unitube (High Intensity Heater)

Short Wavelength Heaters Manufactured to Casso-Solar Technologies' Rigid Specifications with External Reflective Coating. Can be mounted in Banks to Provide Up To 100 Watts per Square Inch.

FiberGas II (High Intensity)

High output, premix type burner, with no maintenance metal matrix knitted face. Radiant output from 30-90,000 BTU per square foot. Maximum output is 200,000 BTU per square foot. Modular design.

Type FB Heater

Wide Area Heaters: Standard Sizes to 12" x 72", Custom Sizes and Shapes, up to 25 Watts per Square Inch, 120-600 Volts. Life Expectancy in Excess of 25,000 Hours in Approved Applications.

Type FHT Heater

Self Contained, High Temperature Furnace Module Includes Complete Oven Insulation and external access electrical terminals. Wattage to 40 Watts per Square Inch and Operating Environments to 1600 Deg F.

Furnace Tube Heaters

External Wound Quartz Tube Heaters for Discrete Zone Control in High Temperature Environments. Provides a combination of radiant energy and convection.

Type C+ Heater

Flat Panel Quartz: Fused Quartz Face, Grooved to Accept a High Temperature Alloy Heater Coil. The Type C+ Provides Up To 50 Watts per Square Inch Radiant Output at 1750 Deg F.

Unitube Heater

Unitube Heater with Unidirectional Tubular Quartz Infrared Heater with Built-In, No Maintenance Reflector.

DuoTube Heater

Dual Tube Configuration, Medium Wavelength, Same reliable performance as Casso-Solar Technologies Unitube Heaters.

Gas Catalytic Heater (Infrared)

Gas catalytic infrared heaters produce water as their only by product. Energy output is equivalent to approximately 9 watts per square inch with temperature ranges of 400-950 deg F.

Gold Unitube Heater

Gold Unitube with External High Temperature Gold Reflective Coating and Directed Energy Control. Custom Sizes Up to 120 inches, and 60 Watts per Lineal Inch on Unitube and 80 Watts per Lineal Inch on Gold Unitube.

Infrared Process Heating in Industrial Manufacturing

Benefits of Electric Infrared Heaters

Being a leading infrared heaters manufacturer for over 50 years, we have had extensive opportunities to serve clients across industries in various critical applications.

The following beneficial features of our infrared equipment have contributed to their widespread acceptance among clients:

Equipped with Quartz Heating Elements

Many of our electric infrared heaters are manufactured with the use of quartz, which allows infrared energy to readily pass through it, making the heaters very efficient due to their minimal internal heat loss.

Our Unitube Heater, Duotube Heater, and Type C+ Heaters are a few of the most popular designs.

Reduced Power Consumption

The construction of our heaters assures the maximum efficiency possible based on the electrical input.

For example, our Unitube heaters are built with an internal no-maintenance reflector to ensure that the majority of the energy produced is directed towards the product.

Our Duotube heaters are manufactured with a white ceramic coating to achieve the same effect.

Suited for Uniform Heating Applications

Uniform heating is a main requirement in many industries where products are manufactured in large scale and then cut down to size later in the process.

Our flat panel infrared heaters such as Type V-Series and FB Heaters have heating elements bonded to an insulating refractory board that can withstand high temperatures.

The refractory board and flat panel design help to create a consistent, stable temperature across the entire surface to assure uniform heating across the product width.

Accurate Process Control

All of our equipment is supplied with easy-to-use operator interfaces and programmable recipes, which enable accurate process control.

Our engineering team also works closely with customers to upgrade or modify their controls when desired.

Design Flexibility

Modular construction of our equipment helps ensure easy customization to suit the heating requirements of the application.

For instance, when using Unitube infrared heaters, the Unitubes can be easily mounted together to create a bank, or they can be pre-wired into multiple zones to suit the particular requirements of a customer’s application.

No Harmful Emissions

Electric power is a clean source of energy, which means infrared heaters burn clean and produce no harmful emissions.


The utilization of quality and proven components have helped us assure performance-driven electric infrared heaters that require almost no maintenance during their lifetime which is typically measured in the tens of thousands of hours.


Related Blog Posts

Catalytic Infrared Paint Curing System Discussed

Catalytic infrared (IR) paint drying/curing systems are used in several industries for drying coatings that have high solvent loads. The catalytic IR curing systems are different than conventional electrical IR dryers in that the main source of energy comes from natural gas or propane rather than electricity.

Gas Catalytic Infrared Heaters: Why They Are Used for Solvent Curing?

Gas-Fired drying systems have been used for years across numerous industries due to the relatively inexpensive cost of heating in this manner. However, when it comes to a process with high solvent loads gas-fired systems are less utilized because of the risk of combustion.

Types of Industrial Electric Infrared Heaters Offered at Casso Solar Technologies: Part 2

Casso-Solar Technologies designs and manufacture several types of electric infrared heaters for different applications and industries, each with its own benefits. To get the best heater for your applications, it is important to understand the different types available.

Types of Industrial Electric Infrared Heaters Offered at Casso-Solar Technologies: Part 1

Infrared heaters are used in a number of industrial processes and are able to be configured to fit nearly any process requiring heating. They are often more efficient than other forms of heating because they maximize the amount of energy delivered to the product without heating the surrounding air.

Get Custom & Standard Designed Infrared Heaters