Wide Area Heaters: Standard Sizes to 12" x 72", Custom Sizes and Shapes, up to 25 Watts per Square Inch, 120-600 Volts.
Life Expectancy in Excess of 25,000 Hours in Approved Applications.
Flat Panel Quartz: Fused Quartz Face, Grooved to Accept a High Temperature Alloy Heater Coil.
The Type C Heater Provides Up To 40 Watts per Square Inch with Emitter Temperatures to 1750 Deg F.
The Type C+ Provides Up To 40 Percent Additional Radiant Output at 1750 Deg F with 60 Watts per Square Inch.
Self Contained, High Temperature Furnace Module Includes Complete Oven Insulation and external access electrical terminals.
Wattage to 40 Watts per Square Inch and Operating Environments to 1600 Deg F.
V-shaped elements with low mass for fast heating/cooling and minimal thermal lag for tight process control
Provides up to 100 Watts per Square Inch with Element temperatures up to 2100 Deg F.
Life Expectancy in Excess of 12,000 Hours depending on temperature.
Similar Design to the Casso-Solar Type FB, with the addition of a Protective Glass-Ceramic Face.
Safely Used Under Products that Drip and In Clean Environments.
Similar Design to the Casso-Solar Type FB heater, with the addition of supply purge air holes patterned through the face.
Provides air directly to the product to aid in drying applications by breaking up the boundary layer of evaporated water or solvent between the heater and product.
Increases drying efficiency, reduces system length.
Power to 25 watts per square inch.
Unitube Heater with Unidirectional Tubular Quartz Infrared Heater with Built-In, No Maintenance Reflector.
Gold Unitube with External High Temperature Gold Reflective Coating and Directed Energy Control
Custom Sizes Up to 120 inches, and 60 Watts per Lineal Inch on Unitube and 80 Watts per Lineal Inch on Gold Unitube
Special Design for Vertical Operation.
External Wound Quartz Tube Heaters for Discrete Zone Control in High Temperature Environments
Provides a combination of radiant energy and convection
Short Wavelength Heaters Manufactured to Casso-Solar Technologies' Rigid Specifications with External Reflective Coating. Can be mounted in Banks to Provide Up To 100 Watts per Square Inch.
Dual Tube configuration - Medium Wavelength - Made in USA
Same reliable performance as Casso-Solar Technologies Unitube Heaters
High output, premix type burner, with no maintenance metal matrix knitted face. Radiant output from 30-90,000 BTU per square foot. Maximum output is 200,000 BTU per square foot. Modular design.
Excellent for drying of paper, drying coatings and pretreatments on continuous coil and other high energy applications
Gas catalytic infrared heaters produce water as their only by product. Energy output is equivalent to approximately 9 watts per square inch with temperature
ranges of 400-950 deg F.
Ideally suited for solvent environments such as paint finishing applications. Can be used to preheat or fully cure, paint or powder coatings. Modular sizes available.